Shenzhen Chuangxin instruments Co., ltd

Showing 11 - 20 of 21, total 3 pages [First] [Previous] [Next] [Last]

glow wire tester
Specification: with high precision
Detail: Stainless Steel Glow Wire Tester It is according to IEC60695-2-1, IEC60695-2-10~IEC60695-2-13(GB/T5169.10-2006~GB/T5169.13-2006), <basic testing methods of Glow wire, basic testing methods of Glow wire device> and UL 7...

iec60335 nail probe
Specification: Strictly designed according to IEC60335
Detail: Fingernail Probe Appliance: The Finger Nail Probe is indicated test IEC60335 and UL requirements. Used to check the security of parts that snap together. The spring gauge assembled in the handle can be calibrated to the...

ul finger probe
Specification: with highe precision
Detail: UL Finger Probe This is the "UL" test finger, researched and designed by UL, and required by most UL Sandards. Palm simulator and restricted joint movement simulates human finger movement. The handle is made of nylon. The f...

iec61032 figure 16 test probe 41
Specification: Strictly designed according to IEC61032, IEC60065
Detail: Test Probe 41 This probe is intended to verify the basic protection against access to glowing heating elements. Technical Parameter: Handle length: 80mm Handle diameter: 50mm

iec61032 figure 13 test probe 19
Specification: Strictly designed according to IEC61032, IEC60065
Detail: IEC61032 Children Finger Test Probe Pin 19 Small finger probe: Ø5.6mm. Conform to the IEC61032 Test probe19.This probe is intended to simulate access to hazardous parts by children of 36 months or less. The handle is made...

iec61032 figure 12 test probe 18
Specification: Strictly designed according to IEC61032, IEC60065
Detail: Children Finger Probe 18 Small finger probe:Ø8.6mm. Conform to the IEC61032 Test probe18.This probe is intended to simulate access to hazardous parts by children of more than36months and less than 14 years. The handle is m...

iec61032 figure 9 test probe 13
Specification: Strictly designed according to IEC61032, IEC60065
Detail: Short Test Pin Probe This pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Conforms to IEC61032 Test probe13, EN, UL and CSA Standards. Handle is m...

iec61032 figure 7 test probe 11
Specification: Strictly designed according to IEC61032, IEC60065
Detail: IEC61032 Test Probe 11 A "rigid" version of the International Test Finger, Used for force applications on openings ,as required by IEC61032 Test probe 11, EN, UL and CSA Standards. Handle is made of nylon, rigid finger is m...

iec61032/iec60529 ip4x test probe d
Specification: Used to verify the protection of persons against access with a w
Detail: 1.0mm Test Wire/ IP4X Used to verify the protection of persons against access with a wire. Meets IEC61032 test probe D and EN Standards including IEC 60529 for IP4 and suffix D codes. The handle and stop face are made of n...

iec61032/iec60529 ip3x test probe c
Specification: 2.5mm Test Rod is to verify the basic protection against access
Detail: Used to verify the protection of persons against access to hazardous parts. Also used to verify the protection against access with a tool. Meets IEC61032 test probe C and EN Standards, including IEC 60529 for IP3 and suffix C...


Showing 11 - 20 of 21, total 3 pages [First] [Previous] [Next] [Last]
1 2 3