Electric Safety Tester

Shenzhen Chuangxin instruments Co., ltd

All Products >> Electric Safety Tester

Showing 1 - 9 of 9, total 1 pages [First] [Previous] [Next] [Last]

iec60065 mandrel test device
Specification: with high precision
Detail: IEC60065 Mandrel Tester Device This test is conforms to IEC60558-1 Fig6 and IEC60065 Fig14--16.The test shall be performed by fixing the specimens of thin sheets on a mandrel made of nickel plated steel or brass with smooth...

ball pressure test apparatus
Specification: with high precision
Detail: Ball Pressure Apparatus IEC60695 Construction: •ball holder with bore and clamping screw for the bow •Precision 5mm pressure ball •Thermocouple for the test stand •Nickel plated steel materials for good therma...

iec60335 electrical stability tester
Specification: with high precision
Detail: IEC60335 Electrical Stability Tester It's to ***ermine the stability of electric appliances which are used on a table or on the floor in accordance with IEC 60065 / 1998-07 clause 19.1, IEC 60335-1 / 1991-04 clause 20....

dielectric strength tester
Specification: with high precision
Detail: Dielectric Strength Tester Features: To improve the insulation board and creepage dielectric properties, surface brushed polished, bottom bracket the minimum distance from the edge of >35mm, the altitude of 2000 meters d...

iec60529 ipx5/6 jet nozzle
Specification: with high precision
Detail: The IPX5/6 Jet Nozzle consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve. The interchangeable nozzles assemble easily to the jet handle. The nozzles are made from stainless steel. ...

iec60529 ipx3/4 waterproof spray nozzle
Specification: with high precision
Detail: IEC60529 IPX4 Spray Nozzle IPX3-4 Spray Nozzle is a hand-held test device to verify protection against spraying and splashing water. The water pressure can be adjusted using the flow control knob on the device to give the r...

hipot tester
Specification: with high precision
Detail: We provide different range hipot tester, such as 5KV, 10KV, 20KV, 30KV,40KV,50KV,80KV etc.

needle flame tester
Specification: with high precision
Detail: According to IEC60695-2-2 and IEC60695-11-5, ZY-3 Needle Flame Tester is applied in the production and quality control department of lighting instrument, hypopiesis electrical apparatus, domestic appliance, machine electric ap...

glow wire tester
Specification: with high precision
Detail: Stainless Steel Glow Wire Tester It is according to IEC60695-2-1, IEC60695-2-10~IEC60695-2-13(GB/T5169.10-2006~GB/T5169.13-2006), <basic testing methods of Glow wire, basic testing methods of Glow wire device> and UL 7...


Showing 1 - 9 of 9, total 1 pages [First] [Previous] [Next] [Last]
1

Shenzhen Chuangxin instruments Co., ltd All Products >> Electric Safety Tester

Shenzhen Chuangxin instruments Co., ltd

All Products >> Electric Safety Tester